The Wintertons Plate – Custom Silkscreen

Designer: Ericka Paige

Share

Instructions

  1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust. 
  2. Apply 3 coats of SC079 Sage Green to the back of the plate and the rim on the front. Apply with a RB144 Soft Fan.  
  3. Apply 3 coats of SC086 Old Lace to the middle of the plate. Apply with a RB144 Soft Fan.  
  4. Add a pinch of AC310 Medium Silkscreen to SC079 Sage Green.  
  5. Mix both together with a pallet knife until the texture is smooth like peanut butter.   
  6. Cut around your silkscreen image of the custom design; leave extra space around the image.   
  7. Place the custom design smooth side down in the middle of the plate over the SC086 Old Lace. It helps to tape the side down to prevent the silkscreen from moving.   
  8. With your finger rub the AC310 Medium silkscreen and SC079 Sage Green mixture over the custom image. Make sure there are no lumps and it is completely smooth.   
  9. Remove the silkscreen. 
  10. Apply stripes round the rim of the plate using SP286 Speckled Old Lace. Apply 3 coats using an AB701 Detail Brush.  
  11. Fire to cone 06.  

Supplies

Form

  • MB1116 Casualware Dinner Plate  

Colors

 

  • SC086 Old Lace
  • SC079 Sage Green
  • SP286 Speckled Old Lace
  • AC310 Silkscreen Medium

Decorating Accessories

 

  • RB144 Soft Fan 
  • Custom Designer Silkscreen (Order custom silkscreens here)

Miscellaneous Accessorie

  • Sponge 
  • Water 
  • Pallet knife 
  • Scissors

Similar Projects

Back to Table Top Projects
Top