Wavy Dolphin Mug

Designer: Carmen Allen



  1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
  2. Using a CB-604 #4 Soft Fan, apply 3 coats of FN-011 Light Blue to the outside of the mug.
  3. Once the glaze is completely dry, use AC-230 Clay Carbon Paper to transfer the design onto the mug.
  4. Using SG-404 Blue Designer Liner, go over the traced design.
  5. Using a CB-106 #6 Script Liner, apply 2 coats of SC-16 Cotton Tail to the belly of the dolphin.
  6. Next, apply 3 coats of SC-60 Silver Lining to the rest of the dolphin.
  7. Using a CB-110 #10/0 Mini Liner, apply 1 coat of SC-15 Tuxedo to the lines on the dolphin.
  8. Using a CB-604 #4 Soft Fan, apply 3 coats of FN-041 Medium Blue to the inside of the mug.
  9. Be sure the waves are completely dry, then apply 1 coat of S-2101 Crystal clear brushing over them.
  10. Let dry completely.
  11. Stilt and fire to shelf cone 06/05.



  • MB-1448 Dolphin Mug


  • FN-011 Light Blue
  • FN-041 Medium Blue
  • SC-15 Tuxedo
  • SC-16 Cotton Tail
  • SC-60 Silver Lining
  • SG-404 Blue Designer Liner
  • S-2101 Crystal Clear Brushing or NT-CLR

Decorating Accessories

  • CB-604 #4 Soft Fan
  • CB-106 #6 Script Liner
  • CB-110 #10/0 Mini Liner
  • AC-230 Clay Carbon Paper

Miscellaneous Accessories