Wavy Flux Plate

Designer: Todd Hickerson

Share

Instructions

  1. Begin with thrown plate using B-Mix cone 5/6 Clay.
  2. Xiem FTS-10344 Fluting Tool Set was used for the carved pattern.
  3. Thoroughly mix SD-172 Macadamia.
  4. Quickly dip plate into SD-172 Macadamia and hold for one second. If not dipping, brush three coats of SW-172 Macadamia using RB-140 #8 Soft Fan brush.
  5. Apply one coat of SW-402 Dark Flux onto the top edges of the plate using a RB-140 #8 Soft Fan brush.
  6. Wipe the bottom of any excess glaze.
  7. Fire on medium speed to cone 5/6.

Supplies

Form

  • B-Mix cone 5/6 Clay

Colors

  • SW-172 or SD-172 Macadamia
  • SW-132 or SD-132 Mirror Black

Decorating Accessories

  • RB-140 #8 Soft Fan
  • AC-302 Wax Resist
  • FTS-10344 Xiem Fluting Tool Set

Miscellaneous Accessories

  • Sponge

Similar Projects

Back to Sgrafitto Projects
Top