Mayco

Instructions

Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust. 
Cut tip with scissors to open your AC-219 Design Bottle with Writer Tip.
Fill Design Bottle with SW401 Light Flux.
Center Mixing Bowl on a banding wheel to create two lines of SW401 Light Flux on the inside of the bowl near the rim using the AC-219 Design Bottle. Second line will be roughly 3/4” lower than the first line.
Once flux has dried use a RB118 #8 Round Brush to create 2 coats of dots with SW101 on top of the Light Flux. Dots should be roughly 1” apart. Apply dots to both lines of light flux making sure to stagger dots between top and bottom row.
Once dry apply 2 coats of SW129 Copper Float to the outside and inside of your bowl.
Once dry, apply 1 coat of SW191 Peppered Plum 2/3 of the way down the bowl on the inside and outside.
Fire to cone 6.

Form

Colors

Decorating Accessories

Miscellaneous Accessories