- Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
- Apply 3 coats of SC016 Cotton Tail to the belly and face. Apply with a CL840 Soft Fan.
- Allow time to dry then outline the snowflakes with SC101 Spruce It Up, apply 3 coats with an AB701 Detail Brush.
- Repeat step 3 with SC027 Sour Apple, outlining SC101 Spruce It Up.
- Take either a Dotting Gyre or a Q tip to make different sized dots on the belly. Apply SC027 Sour Apple, SC011 Blue Yonder, and SC101 Spruce It Up. Apply one coat.
- For the eyes apply SC011 Blue Yonder with either a Dotting Gyre or a Q tip. Apply one coat.
- Apply SC023 Jack O Lantern to the beak and feet. Apply 3 coats with an AB701 Detail Brush.
- Apply SC011 Blue Yonder and SC027 Sour Apple on every other notch on the scarf. Then apply SC101 Spruce It Up to the fringe at the end of the scarf. Apply 3 coats of each glaze with an AB701 Detail Brush.
- Apply SG305 Spearmint to the entire body excluding the face and belly. Apply 2 to 3 coats using a CB840 Soft Fan Brush.
- Allow time to dry then fire it to cone 06.
Additional Adaptations & Tips if needed
- If glaze gets into the holes, use a toothpick to clean them out. Easier to clean when glaze is still wet.
