Aged Metallic Faceted Cat

Designer: Bob Moreni

Share

Instructions

  1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
  2. Basecoat the cat with SS-138 Flat Black. Allow to dry!
  3. Apply 2 coats of MM-104 Dark Bronze Metallic to the cat. Allow to dry!
  4. Place the cat on a couple layers of paper towels.
  5. Working from the bottle of metallic color drizzle MM-102 Copper Metallic then some MM-105 Gold Metallic.
  6. Spritz a heavy coating of MM-202 Green Patina to the piece while the MM-102 Copper Metallic and the MM-105 Gold Metallic are still wet.
  7. Drizzle a little more of the MM-102 Copper Metallic and the MM-105 Gold Metallic then spritz again, not as heavy. Allow to dry!
  8. Working from the bottle of metallic color drizzle MM-106 Steel Metallic here and there on the piece. Spritz with MM-305 Rapid Rust on the MM-106 Steel Metallic while it is still wet. Allow to dry!
  9. Apply 1-2 coats of AC502 Matte Sealer to the piece.
  10. DO NOT FIRE

Supplies

Form

  • CD1517+ Faceted Cat Mold or MB-1517 Faceted Cat Bisque

Colors

  • MM-102 Copper Metalic
  • MM-104 Dark Bronze Metallic
  • MM-105 Gold Metallic
  • MM-106 Steel Metallic
  • MM-202 Green Patina
  • MM-305 Rapid Rust
  • SS-138 Flat Black

Decorating Accessories

  • Basecoat Brush
  • AC-502 Matte Sealer
  • MM-600 Spritzer Caps

Miscellaneous Accessories

  • Foam Plates
  • Paper Towels
  • Water Bowl
Top