Elements Flat Vase

Designer: Laura Fraedrich

Share

Instructions

  1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
  2. Thin some EL-141 Aged Bronze with water (3 parts glaze, 1 part water)  in a small cup until it is the consistency of heavy cream. Pour the contents into the vase and roll it to coat the entire inside. Stand vase upside down to drain.
  3. Use the CB-604 #4 Soft fan  to apply three coats of EL-141 aged bronze to the top, sides and bottom of the vase, including spout.
  4. Using a pencil, draw 8 equal blocks on the front of the vase, 4 on top and 4 on the bottom.
  5. Using the CB-604 #4 Soft Fan brush three coats of the following colors to the sections, apply EL-140 Toasted Almond to two blocks, EL-136 Lapis Lagoon to two blocks, EL-121 Copper Adventurine to two blocks, and EL-123 to two blocks.
  6. Using the CB-110 #10 10/0 Liner  apply 2 coats of SC-15 Tuxedo in between each of the blocks where your pencil lines were.
  7. Stilt and fire to cone 06.

Supplies

Form

  • MB-1391 Medium Flat Vase

Color

  • EL-140 Toasted Almond
  • EL-141 Aged Bronze
  • EL-136 Lapis Lagoon
  • EL-121 Copper Adventurine
  • EL-123 Patina
  • SC-15 Tuxedo

Decorating Accessories

  • CB-604 #4 Fan Brush
  • CB-106 #6 Script Liner

Miscellaneous Accessories

  • Pencil
Top