Blue Crystal Lantern Mold

Designer: Elizabeth Carey

Share

Instructions

  1. Pour CD-002 Woven Lantern mold ¼” thick. Refer to casting instructions.
  2. Once it is firm enough to handle, use the X-ACTO knife to cut out the spaces between the woven lattice.
  3. Use the 1/4” punch to make the 2 holes at the top of the lantern.
  4. Use the sponge to smooth down any casting lines or rough edges.
  5. Fire to cone 04.
  6. Using the Soft Fan with FN-001 White, apply 3 coats to the entire lantern. Allow glaze to dry between coats.
  7. Using the Script Liner with FN-031 Corn Flower Blue, apply 3 coats to the upper bands around the lattice. Apply 3 coats to the upper lip of the lantern. Allow glaze to dry between coats.
  8. Using the Script Liner with S-2701 Peacock Eyes, apply 2 coats to the outside of the lattice.
  9. Fire to cone 06.

Supplies

Form

  • CD-002 Woven Lantern

Colors

  • FN-001 White
  • FN-031 Corn Flower Blue
  • S-2701 Peacock Eyes

Decorating Accessories

  • CB-106 # 6 Script Liner
  • CB-4-04 # 4 Soft Fan

Miscellaneous Accessories

  • Sponge
  • X-Acto Knife
  • 1/4″ Punch
Top