Colorful Seahorse Tile

Designer: Marcia Roullard

Share

Instructions

1. Thin slightly SC-91 Seabreeze with water and brush one coat to the background with CB-604 Soft Fan.

2. Use the various Designer Liner colors to make the coral reef as pictured.

3. Fill in the rings of color with one coat of the various Stroke and Coat colors. Brush one coat of SC-34 Down to Earth around the coral shapes with CB-106 Script Liner.

4. Squeeze about 2 TBS of SC-15 Tuxedo onto a palette. Add a pinch of AC-310 Silkscreen Medium. Mix with a palette knife until it becomes the consistency of peanut butter. You may need to add more silkscreen medium or glaze.

5. Place the seahorse silkscreen from DSS-0102 Sea Life on the tile. While holding the screen firmly in place, take a small amount of premixed silkscreen medium, and gently rub in circles starting in the center and working outward. Slowly pull up the screen to avoid smearing. To silkscreen the seahorse facing the opposite direction, clean the silkscreen and repeat the same steps on the opposite side.

6. Brush on one coat of the Stroke & Coat colors with CB-106 Script Liner or CB-110 Liner over the sea life silkscreen to give it color.

7. Brush on 1-2 coats of S-2101 Clear with CB-604 Soft Fan.

8. Fire to cone 05/06.

Supplies

Form

  • 6″ Tile

Colors

  • SG-401 Black Designer Liner
  • SG-403 Red Designer Liner
  • SG-404 Blue Designer Liner
  • SG-407 Yellow Designer Liner
  • SG-408 Orange Designer Liner
  • SC-11 Blue Yonder
  • SC-15 Tuxedo
  • SC-23 Jack O’ Lantern
  • SC-27 Sour Apple
  • SC-34 Down To Earth
  • SC-91 Seabreeze
  • S-2101 Clear

Decorating Accessories

  • DSS-0102 Sea Life
  • AC-310 Silkscreen Medium
  • CB-106 #6 Script Liner
  • CB-604 #4 Soft Fan
  • CB-110 10/0 Liner

Miscellaneous Accessories

  • Palette Knife
Top