Foundations under Elements Mandala Plate

Designer: Elizabeth Carey

Share

Instructions

  1. Begin with properly fired cone 04 bisque. Moisten a sponge and wipe bisque to remove any dust.
  2. Using the Soft Fan with FN-009 Black, apply 3 coats to the back of the plate. Allow glaze to dry between coats.
  3. Using the Soft Fan with FN-009 Black, apply 2 coats to the front of the plate. Allow glaze to dry between coats.
  4. Cut around the border of the 2 patterns and tape together to form a circular pattern. Place the pattern over the front of the plate after the glaze is dry to the touch, but not bone dry. Trace over the pattern with the pencil. Check to make sure you are not pressing too hard or too soft. You want to be able to see the lines, but not scrape down to the bisque. Remove the pattern.
  5. Take your 5 AC-220 Detailer Tips and 1 oz Bottles and fill each one around half-way full with the following glazes: EL-103 Sea Spray, EL-128 Wheat, EL-142 Grass, EL-143 Cactus Flower, and EL-148 Smoked Lilac. Make sure to label each bottle because some of the glazes will look similar.
  6. Use the bottles from Step #5 to make large dots on the lines of the pattern. You want the dots to be close to each other, but not touching. You can choose which color to use for each part of the pattern. Refer to the “Color” section for how each Element will look after it is fired. Doing the dots over FN-009 Black will change the glaze color from its usual appearance.
  7. Fire to cone 06.

Supplies

Form

  • MB-102 Coupe Dinner Plate

Colors

  • EL-103 Sea Spray (pale blue dots)
  • EL-128 Wheat (yellow dots)
  • EL-142 Grass (pale yellow/green dots)
  • EL-143 Cactus Flower (pink/orange dots)
  • EL-148 Smoked Lilac (pale purple dots)
  • FN-009 Black

Decorating Accessories

  • AC-220 Detailer Tips and 1 oz Bottles (5)
  • RB-144 #4 Soft Fan

Miscellaneous Accessories

  • Sponge
  • Water
  • Pattern
  • Scissors
  • Scotch Tape
  • Pencil
Top