Kaboom Tray

Designer: Marcia Roullard



  1. Begin with properly fired shelf cone 04 Bisque. Moisten a clean Sponge and wipe Bisque to remove any dust.
  2. Using a pencil, sketch your own letter.
  3. Using a CB-106 #6 Script Liner, apply 3 Coats of SC-74 Hot Tamale to the letter.  Allow to dry.
  4. Using the ½” masking tape, tape off the center section of the tray.
  5. Using a CB-604 #4 Soft Fan, apply 2-3 Coats of S-2731 Kaboom to the center section of the tray being careful going around the letter. Remove the tape before the last coat dries to avoid chipping.
  6. Using a CB-604 #4 Soft Fan, apply 3 Coats of FN-018 – Bright Blue to the edge and back of the tray.
  7. Using the AC-222 Medium Writer Tip, fill the empty squeeze bottle with SG-202 White Cobblestone.  Apply squiggle lines around the edge of the try.  Allow to dry.
  8. Stilt and fire to shelf cone 06.



  • MB-882 Rectangle Tray Mold or CD-882 Rectangle Tray Mold


  • FN-018 Bright Blue
  • SC-74 Hot Tamale
  • SG-202 White Cobblestone
  • S-2731 Kaboom

Decorating Accessories

  • AC-222 – Medium Writer Tip
  • BT-910 – Synthetic Sponges
  • CB-106 – #6 Script Liner
  • CB-604 – #4 Soft Fan

Additional Materials

  • Pencil
  • ½” masking tape