Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
Draw an outline of a large butterfly in the middle of the bowl.
Dip your finger into SC015 Tuxedo and make one vertical line in the middle of the plate for the butterfly’s body, then with your finger, add one large dot on top of the line for the head. Apply one coat.
Still using SC015 Tuxedo, add 4 more lines coming out of the body, two at the top and two at the bottom for the butterfly wings. Apply one coat.
With your finger, apply 4 to 5 lines on each wing using SC030 Blue Dawn. Start from the outside of the wings and pull your finger in toward the body of the butterfly. Apply one coat.
Repeat step 4 with SC053 Purple Haze, overlapping SC030 Blue Dawn. Overlapping does not need to be perfect.
Repeat step 4 with SC017 Rosey Posey, overlapping SC053 Purple Haze. Overlapping does not need to be perfect.
Repeat step 4 with SC016 Cotton tail, this time starting in the middle of the butterfly wing.
On the rim of the bowl,apply 10 sets of 3 dots of SC053 Purple Haze. In-between those dots apply 2 dots of SC017 Rosey Posey or SC030 Blue Dawn. Apply one coat using your finger. This will be the caterpillars.
Use the very tip of your finger or your fingernails to make thinner lines for the antennas on all the caterpillars and butterfly. Apply one coat using SC015 Tuxedo.
Allow time to dry then apply 2 coats of S2101 Clear Glaze to the inside and outside of the bowl.
