Oyster and Green Opal Tumbler

Designer: Carmen Allen

Share

Instructions

  1. Begin with properly fired cone 04 bisque. Moisten a clean sponge and wipe the bisque to remove any dust.
  2. Using a CB-106 #6 Script Liner, apply 3 coats of SW-110 Oyster in evenly spaced bands down the piece. The sample had about ½” wide bands with equal space in between. Using a banding wheel is super helpful for this step!
  3. Using a RB-144 #4 Soft Fan, apply 3 coats of SW-253 Green Opal to the entire piece, avoiding the bottom. 
  4. Use a clean sponge to wipe the excess glaze off the foot.
  5. Fire to cone 5 / 6 – sample was fired to cone 6.

Supplies

Form

  • SB-128 Stoneware Tumbler

Colors

  • SW-110 Oyster
  • SW-253 Green Opal

Decorating Accessories

  • CB-106 #6 Script Liner
  • RB-144 #4 Soft Fan 

Miscellaneous Accessories

  • Sponge
  • Water Bowl
Top