Ringed Stoneware Bud Vase

Designer: Elizabeth Downing

Share

Instructions

  1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust. 
  2. With a #4 Soft Fan Brush (RB144) apply 2 coats of EG005  Black Engobe to the entire inside and outside of the vase, including the bottom. 
  3. Apply 2 coats of SW217 Micro Cerulean to the entire inside of the vase and to the top 3/2 of the outside of the vase using a #4 Soft Fan Brush 
  4. Using a #4 Soft Fan Brush apply 2 coats of SW177 Raspberry Mist  to the entire inside of the vase and to the top 2/3 of the outside of the vase. 
  5. Fire to cone 6.

Additional Adaptations & Tips  

  • You do not need to wipe off the Engobe from the bottom of the piece. Engobe does not stick to the kiln shelf.
  • You do not need to stilt this piece.  

 

Additional Adaptations & Tips  

  • You do not need to wipe off the Engobe from the bottom of the piece. Engobe does not stick to the kiln shelf.
  • You do not need to stilt this piece.

 

Supplies

Form

  • SB15r Ringed Bud Vase

Colors

  • SW177 Raspberry Mist 
  • SW217 Micro Cerulean 
  • EG005 Black Engobe 

Decorating Accessories

  • RB144 – #4 Soft Fan Brush 

Miscellaneous Accessories

  • Sponge
  • Water
Top