Large Vintage Nesting Bowl
- Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust. Do not oversaturate the bisque with water.
- Apply 3 coats of SW172 Macadamia to the entire inside of the bowl using a #8 Soft Fan Brush.
- Using a #4 Soft Fan Brush, apply 3 coats of SW172 Macadamia to the top of the outside of the decorative rim.
- With a #8 Soft Fan Brush apply 3 coats of EG007 Terracotta Engobe to the outside of the bowl, under the rim including the bottom of the bowl.
- On a plate, using a palate knife, mix SW508 Black Gloss with AC310 silkscreen medium. This should have a consistency of pancake batter.
- Apply silkscreens to the outside of the bowl over the Terracotta Engobe with the Black Gloss/Silkscreen mixture.
- Do not wipe Engobe off the bottom of the piece. Engobes do not stick to the kiln shelf
- Do not stilt
- Fire to cone 6
Medium Vintage Nesting Bowl
- Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust. Do not oversaturate the bisque with water.
- Apply 3 coats of SW514 Sage Gloss to the entire inside and ½ of the outside of the bowl using a #8 Fan Brush.
- With a #8 Soft Fan Brush apply 3 coats of EG007 Terracotta Engobe to the outside bottom ½ of the bowl including the bottom of the bowl.
- On a plate, using a palate knife, mix SW508 Black Gloss with AC310 silkscreen medium. This should have a consistency of pancake batter.
- Apply silkscreens to the inside of the bowl over the over the Sage Gloss with the Black Gloss/Silkscreen mixture.
- Do not wipe Engobe off the bottom of the piece. Engobes do not stick to the kiln shelf.
- Do not stilt.
- Fire to cone 6.
Small Vintage Nesting Bowl
- Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust. Do not oversaturate the bisque with water.
- Apply 3 coats of SW172 Macadamia to the entire inside of the bowl using a #8 Soft Fan Brush.
- Using a #4 Soft Fan Brush, apply 3 coats of SW172 Macadamia to the top of the outside edge of the bowl.
- With a #4 Soft Fan Brush, apply 3 coats of SW514 Sage Gloss to the bottom decorative edge of the outside of the bowl.
- With a #8 Soft Fan Brush apply 3 coats of EG007 Terracotta Engobe to the outside of the bowl, under the rim including the bottom of the bowl.
- On a plate, using a palate knife, mix SW508 Black Gloss with AC310 silkscreen medium. This should have a consistency of pancake batter.
- Apply silkscreens to the outside of the bowl over the Terracotta Engobe with the Black Gloss/Silkscreen mixture.
- With a #8 Round Brush fill in parts of the silkscreen images with SW514 Sage Gloss.
- Do not wipe Engobe off the bottom of the piece. Engobes do not stick to the kiln shelf.
- Do not stilt.
- Fire to cone 6.
