Snow Gems Over Foundations Vases

SG303 Citrus Snow Gem 

1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust. 
2. Apply SG 101 Rapid Roll White to the inside of the vase. Quickly roll for one coat coverage, then tip the vase upside down and allow the glaze to drain until it’s no longer dripping. 
3. On the inside of the lip of the vase apply 3 coats of FN021. Apply with a CB604 soft fan. 
4. On the outside and bottom of the vase apply 3 coats of FN044. Apply with a CB604 soft fan. 
5. Once dry apply FN043 and FN016 for the two round lines coming from the bottom of the vase. Apply 3 coats for each round line, using a CB106 Scripted Liner. 
6. Now SG303 for the leaf design that will overlap the round lines. Apply 2 to 3 coats using a CB106 Scripted Liner.  
7. On the rim of the vase apply 2 coats of SG303 with a CB106 Scripted Liner.  
8. Add several dots around the leaf design using SG303, FN037, and FN052. Apply with the round end of a paint brush.  
9. Let dry and fire to cone 06. 

SG304 Berry Snow Gem 

1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust. 
2. Apply SG 101 Rapid Roll White to the inside of the vase. Quickly roll for one coat coverage, then tip the vase upside down and allow the glaze to drain until it’s no longer dripping. 
3. On the inside of the lip of the vase apply 3 coats of FN0036. Apply with a CB604 soft fan. 
4. On the outside and bottom of the vase apply 3 coats of FN012. Apply with a CB604 soft fan. 
5. Once dry apply FN017 and FN035 for the two round lines coming from the bottom of the vase. Apply 3 coats for each round line, using a CB106 Scripted Liner. 
6. Now SG304 for the leaf design that will overlap the round lines. Apply 2 to 3 coats using a CB106 Scripted Liner.  
7. On the rim of the vase apply 2 coats of SG304 with a CB106 Scripted Liner.  
8. Add several dots around the leaf design using SG304, FN004, and FN051. Apply with the round end of a paint brush. 
9. Let dry and fire to cone 06. 

SG305 Spearmint Snow Gem 

1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust. 
2. Apply SG 101 Rapid Roll White to the inside of the vase. Quickly roll for one coat coverage, then tip the vase upside down and allow the glaze to drain until it’s no longer dripping. 
3. Outside on the top half of the vase apply FN034 with a CB604 soft fan, apply 3 coats. 
4. Outside on the bottom half of the vase apply 3 coats of FN053. Apply with a CB604 soft fan. 
5. Once dry apply FN019 and FN010 for the two round lines coming from the bottom of the vase. Apply 3 coats for each round line, using a CB106 Scripted Liner. 
6. Now SG305 for the leaf design that will overlap the round lines. Apply 2 to 3 coats using a CB106 Scripted Liner.  
7. In between the top and bottom half of the vase apply 2 coats of SG305 with a CB106 Scripted Liner.  
8. Add several dots around the leaf design using SG305, FN007, and FN041. Apply with the round end of a paint brush. 
9. Let dry and fire to cone 06.