- Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
- Trace the pattern on the tile using AC230 Clay Carbon Paper and a pencil.
- Decide where you would like to place your color choices.
- Using a CB602 #2 Soft Fan, apply 3 coats of each color to the are you would like that color. Allow to dry between each coat.
- After all colors have been applied, remove the masking tape. Brush off any crumbs of dry color.
- Using a CB604 #4 Soft Fan, apply 2 coats of S2101 Crystal Clear Brushing glaze to the top side of the tile. Optional: You can glaze the back of the tile if you like.
- Stilt and Fire to Cone 06/05.
Additional Adaptations & Tips
- Make sure to shake the Stroke & Coats well.
- Be careful when applying the Speckled Stroke & Coats not to get the specks to bunch in one area.
