Birch and Fool’s Gold Stoneware Plate

Designer: Carmen Allen



  1. Place plate on the center of the banding wheel.
  2. Load fan brush with SW-131 Birch and as the banding wheel is spinning, apply 2 coats of glaze allowing the coats to dry in between. Keep glaze inside of the rim.
  3. Apply 3 coats of SW-178 Fool’s Gold to the back of the plate. Avoid the foot.
  4. Repeat step 2, but with SW-178 Fool’s Gold and bring it out to the rim.
  5. Use a sponge to clean up any glaze that may have gotten on the foot.
  6. Let dry completely.
  7. Fire to shelf cone 5/6.



  • SB-104 Rimmed Salad Plate


  • SW-131 Birch
  • SW-178 Fool’s Gold

Decorating Accessories

  • CB-618 #8 Soft Fan

Miscellaneous Accessories

  • Banding Wheel