Black and White Maze Vase

Designer: William Pulse

Share

Instructions

  1. Wipe down the bisque with a moistened Synthetic Sponge to remove any dust and debris. Check the inside of the vase as well.
  2. Using CB-604 Soft Fan to apply 3-4 coats of FN-51 Strawberry to the inside of the vase. Wipe off any color from the outside using a dampened Synthetic Sponge. Any bright color can be used as a contrast to match your décor. (i.e. FN-002 Yellow, FN-018 Bright Blue, FN-37 Chartreuse.)
  3. Apply 3 coats of FN-009 Black to the outside of the vase using CB-604 Soft Fan. Let Dry.
  4. Fill about half of the AC-219 Designer Bottle with SG-202 Cobblestone and replace the metal tip. If you are unsure of your design, practice on a piece of paper to get the feel of the squiggle doodle pattern. You can use the pattern provided as a guide. You can use the pencil to sketch in the pattern prior to painting if needed.
  5. Starting from the top of the vase, apply one coat of the cobblestone to form the pattern using the Designer Bottle. A thicker heavier line will break up more than a thin line. Try to keep the lines even while painting while completing the design.
  6. Stilt and Fire to Shelf Cone 05-06.

Supplies

Form

  • MB-1145 Tulip Vase bisque of CD-1145 mold

Colors

  • FN-009 Black,
  • FN-051 Strawberry
  • SG-202 White Cobblestone

Decorating Accessories

  • CB-604 Soft Fan
  • AC-219 Designer Bottle w/ metal tip

Miscellaneous Accessories

Top