Bright Retro Dad Plate

Designer: Elizabeth Carey

Share

Instructions

  1. Begin with properly fired cone 04 bisque. Moisten a sponge and wipe bisque to remove any dust.
  2. Center the pattern on the plate. Slide AC-230 Clay Carbon Paper under the pattern. Trace over the pattern with the pencil.
  3. Using the Script Liner with SC-24 Dandelion, apply 2 coats to the center “outline section” around the word “dad”. Allow glaze to dry between coats.
  4. Using the Script Liner with SC-88 Tu Tu Tango, apply 2 coats to the outer “outline section” around the word “dad”. Allow glaze to dry between coats.
  5. Using the Script Liner with SC-28 Blue Isle, apply 2 coats to the inner “outline section” around the word “dad”. Allow glaze to dry between coats.
  6. Using the Soft Fan with SC-15 Tuxedo, apply 2 coats to the back of the plate. Allow glaze to dry between coats.
  7. Using the Soft Fan with SG-702 Speckta-Clear Celebration, apply 2 coats to the front of the plate. Allow glaze to dry between coats.
  8. Stilt and fire to cone 06.

Supplies

Form

  • MB-102 Coupe Dinner Plate

Colors

  • SC-15 Tuxedo
  • SC-24 Dandelion
  • SC-28 Blue Isle
  • SC-88 Tu Tu Tango
  • SG-702 Speckta-Clear Celebration

Decorating Accessories

  • AC-230 Clay Carbon Paper
  • RB-144 #4 Soft Fan
  • RB-106 #6 Script Liner

Miscellaneous Accessories

 

Similar Projects

Back to Table Top Projects
Top