Copper Jade Bowl

Designer: Carmen Allen



  1. Begin with properly fired cone 04 stoneware bisque. Moisten a sponge and wipe bisque to remove any dust.
  2. Using the AC-222 Medium Writer Tip Kit without the metal tip, apply SW-401 Light Flux in a pattern around the top edge of the piece. We applied 2 rows of “w”s so there is a space to add the Stroke and Coat.
  3. Exchange the cap on your SC for an AC-224 Plastic Detailer Cap and apply SC-9 Jaded as dots inside of the loops made with the Flux.
  4. Allow the glaze to dry.
  5. Apply 3 coats of SW-130 Copper Jade to both the inside and outside of the bowl. Allow the glaze to dry in between coats and avoid glazing the foot.
  6. Use a damp sponge to wipe away any glaze that may have gotten on the foot.
  7. Fire to cone 5/6. *Sample piece was fired to cone 6*



  • SB-106 Rimmed Bowl


  • SW-130 Copper Jade
  • SW-401 Light Flux
  • SC-9 Jaded

Decorating Accessories

  • RB-140 #8 Soft Fan
  • AC-222 Medium Writer Tip Kit
  • AC-224 Plastic Detailer Cap

Miscellaneous Accessories

  • Sponge