Crackle and Stroke & Coat Bunny Facet-ini

Designer: Elizabeth Carey



  1. Begin with properly fired cone 04 bisque. Moisten a sponge and wipe bisque to remove any dust.
  2. Squeeze around 1 TBS SC-15 Tuxedo onto the palette. Thin with around 1 TSP of water. Using the Soft Fan, apply 1 coat to the bunny. Use a damp sponge to wipe away most of the glaze, leaving it in the crevices.
  3. Using the Script Liner with SC-15 Tuxedo, apply 2 coats to the nose, eyes and tail. Add decorative dots going down the face and back. Allow glaze to dry between coats.
  4. Using the Detail Liner with SC-15 Tuxedo, make lines 2 lines going down each foot.
  5. Using the Soft Fan with CC-101 Transparent, apply 3 coats to the entire bunny. Allow glaze to dry between coats.
  6. Fire to cone 06.
  7. Squeeze around 1 TSP SS-138 Flat Black onto the palette. Thin with around ½ TSP of water. Use the Soft Fan to apply 1 coat over the bunny. Wipe off with a damp sponge. You should be able to see the crackles in the glaze.



  • MB-1565 Bunny Facet-ini  


  • CC-101 Transparent
  • SC-15 Tuxedo
  • SS-138 Flat Black

Decorating Accessories

  • RB-144 #4 Soft Fan
  • RB-106 #6 Script Liner
  • RB-110 10/0 Detail Liner

Miscellaneous Accessories

  • Sponge
  • Water
  • Palette
  • Pencil