Crystal Garden Ornaments

Designer: Marcia Roullard



  1. In leather-hard greenware, pencil in the design cuts, use an X-ACTO knife to cut the design, clean the edges with a stiff wet brush.  When dry, fire to cone 04.
  2. For CD-607 and CD-605 thin slightly FN-002 Yellow, pour to the inside, turn to coat, pour out the excess, wipe off excess glaze from the outside with a damp sponge.  Thin FN-050 Coral, pour to the inside of CD-607, same as above.
  3. Brush CG-979 Meadow 2-3 coats with CB-604 Soft Fan to the body of CD-606 Garden Ornament, brush the rings with CG-718 Blue Caprice two coats, use CB-106 Script Liner.
  4. Brush the body of CD-605 with two coats of CG-966 Tiger Lily, and one coat of CG-756 Firecracker, patting it on leaving some of the Tiger Lily showing.  Brush the rings with CG-717 Pistachio.
  5. Brush three coats of S-2724 Lotus Blossom to the body of CD-607 Garden Ornament, brush the rings and ball top with 2 coats of SC-42 Butter Me Up, float SC-89 Cutie Pie Coral around the rings, with CB-106 Script Liner.
  6. Fire to cone 06.
  7. Stake on copper tubing.



  • CD-607 10 1/2″ Garden Ornament
  • CD-606 9 1/4″ Garden Ornament
  • CD-605 8″ Garden Ornament


  • SC-42 Butter Me Up
  • SC-89 Cutie Pie Coral
  • FN-50 Coral
  • FN-002 Yellow
  • S-2724 Lotus Blossom
  • CG-966 Tiger Lily
  • CG-756 Firecracker
  • CG-718 Blue Caprice
  • CG-979 Meadow

Decorating Accessories

  • CB-604 Soft Fan
  • CB-106 Script Liner

Miscellaneous Accessories

  • X-ACTO knife
  • Copper tubing