Elements Wind Face Plaque

Designer: Carmen Allen



  1. Begin with properly fired earthenware bisque.
  2. Wipe with a damp sponge to remove any dust.
  3. Apply 1 coats of UG-50 to the entire piece and wipe back with a sponge, leaving the underglaze in the details/texture.
  4. Once dry, use the CB-624 #4 glaze fan to apply 3 coats of EL-118 Blue Grotto to the entire piece. Using a stiff brush will help apply the glaze into the texture without applying it too thick. Be sure to fully brush out the coats to avoid pooling of the glaze in the texture.
  5. Use the script liner to apply 2 coats of PC-602 White Cascade to the wind.
  6. Apply 1 coat of EL-101 Oyster to highlighted areas.
  7. Allow to dry completely.
  8. Stilt and fire to cone 06/05. Sample was fired to cone 06



  • 4013 Wind Face Plaque
  • SLE01 White Low-Fire Casting Slip


  • UG-50 Jet Black
  • EL-101 Oyster
  • EL-118 Blue Grotto
  • PC-602 White Cascade

Decorating Accessories

  • CB-106 #6 Script Liner
  • CB-624 #4 Glaze Fan

Miscellaneous Supplies

  • Sponge
  • Water