Fairy House Windows

Designer: Marcia Roullard



  1. Begin with properly fired shelf cone 04 Bisque. Moisten a clean sponge and wipe bisque to remove dust.
  2. Thin SC-97 Cant-elope like water. Use the Script Liner to apply one coat to the glass area on both windows. Remove the color from the centers of the windows with a stiff brush. Let dry.
  3. Thin SC-15 Tuxedo then use the Script Liner to shade the left side of the window.
  4. Awning Window: Use the Script Liner to apply two coats of SC-16 Cotton Tail to the top. Wet the 1/2″ and 1″ circles and place them on the Cotton Tail. Press with a paper towel to remove excess water and ensure edges are sealed.
  5. Use the Soft Fan to apply three coats of SC-73 Candy Apple Red over the top of the roof. Remove the paper circles.Apply three coats of the following colors with the Liner and Script Liner:
  6. Use the Liner to apply one coat of SC-15 Tuxedo to the trim, outline the flowers and leaves and shade under the leaves.
    • Flowers: two coats of SC-73 Candy Apple Red and SC-97 Cant-elope
    • Leaves: two coats of SC-26 Green Thumb
    • Planter box: three coats of SC-13 Grapel, thinned
    • Branches: two coats of SC-27 Sour Apple
  7. Shutter Window: Use the Liner and Script Liner to apply the following colors:
  8. Use the Liner with SC-15 Tuxedo to outline between the slats of wood. Apply SC-15 Tuxedo to the door and window trim.
    • Bricks: three coats of SC-77 Glo-Worm; brush over with very thin SC-26 Green Thumb to antique
    • Shutters: three coats of SC-13 Grapel
  9. Apply S-2101 Clear Brushing Glaze the windows only.
  10. Fire to cone 05/06.



  • MB-1500 Fairy Window with Awning
  • MB-1501 Fairy Window w/Shutters


  • SC-13 Grapel
  • SC-15 Tuxedo
  • SC-16 Cotton Tai
  • SC-26 Green Thumb
  • SC-77 Glo-Worm
  • SC-97 Cant-elope
  • S-2101 Clear Brushing Glaze

Decorating Accessories

  • CB-604 #4 Soft Fan
  • CB-106 #6 Script Liner
  • CB-110 #10/0 Liner

Miscellaneous Accessories

  • Sponge
  • 1″ Circle Punch
  • 1/2″ Circle Punch