Mod Flower Tile

Designer: Marcia Roullard



  1. Begin with properly fired shelf cone 04 Bisque. Moisten a clean sponge and wipe bisque to remove any dust.
  2. Snip the tops of the AC-224 Detailer Caps for a larger opening. Mix CG-753 Sassy Orange and CG-756 Firecracker and pour each into one of the two ounce bottles. Fill one bottle with SC-11 Blue Yonder (no need to snip the tip of the applicator).
  3. At the top of the tile, squirt a heavy line of Firecracker, then a heavy line of Sassy Orange, lastly a wide line of SC-11 Blue Yonder. Gently tap the tile on the top edge against a hard surface to move the glaze to fill in the gaps and blend the colors.
  4. Use the Soft Fan to apply two coats of FN-001 White to the remainder of the tile.  Pull the SC-11 Blue Yonder into the white at the wet edge of the Blue Yonder.
  5. Fill an AC-220 Detailer Bottle with SG-201 Black Cobblestone. While the FN-001 White glaze is wet, squirt four lines of the Black Cobblestone into the wet glaze. Let dry.
  6. Draw or trace the pattern onto the tile. Use the Script Liner to apply two coats of SC-74 Hot Tamale, CG-753 Sassy Orange and CG-990 Starry Night to the flowers. Apply the crystal glaze heavily.
  7. Use the Script Liner to apply two coats of SG-201 Black Cobblestone to the centers of the flowers. Use the Liner with SC-15 Tuxedo to outline fill in the stems.
  8. Fire to cone 05/06.



  • 6″ Tile


  • SC-11 Blue Yonder
  • SC-15 Tuxedo
  • SC-74 Hot Tamale
  • FN-001 White
  • CG-753 Sassy Orange
  • CG-756 Firecracker
  • CG-990 Starry Night
  • SG-201 Black Cobblestone

Decorating Accessories

  • AC-220 Detailer Bottles
  • 2 oz. bottles
  • AC-224 Plastic Detailer Caps
  • CB-604 #4 Soft Fan
  • CB-106 #6 Script Liner
  • CB-110 #10/0 Liner

Miscellaneous Accessories