Rustic Pitcher and Tumblers for July 4

Designer: Marcia Roullard

Share

Instructions

  1. Begin with a properly fired shelf cone 04 Bisque. Moisten a clean sponge and wipe bisque to remove dust.
  2. Thin slightly FN-006 Blue with water, pour to the inside, turn to coat, pour out excess glaze, drain. Use a damp sponge to remove the glaze from the top edge and all drips.
  3. Brush on 2-3 coats of FN-001 White to the outside of the pitcher and tumblers with CB-604 Soft Fan.
  4. Measure and 1 1/2″ from the bottom of the tumblers, tape with 1/4″ tape on that line, measure 2 3/4″ from the bottom of the pitcher, tape with 1/2″ tape on the line.
  5. Punch out numerous stars in both sizes, brush water over sections at a time over the White glaze, stick on the paper stars. Make sure to remove gaps from the paper to prevent bleed.
  6. Brush three coats of FN-006 Blue over the star areas, brush to the taped line. Remove the stars and leave the tape.
  7. Tape the remaining areas on the tumblers and the pitcher to create the red stripes. Brush over the open areas with 2-3 coats of SC-74 Hot Tamale, use CB-106 Script Liner. Remove the tape.
  8. Brush with one coat of S-2101 Clear using CB-604 Soft Fan.
  9. Fire to cone 05/06.

Supplies

Form

  • MB-1472 Rustic Ware Pitcher
  • MB-1474 Rustic Ware Tumblers

Colors

  • SC-74 Hot Tamale
  • FN-001 White
  • FN-006 Blue
  • S-2101 Clear

Decorating Accessories

  • CB-604 Soft Fan
  • CB-106 Script Liner

Miscellaneous Accessories

  • Large star punch
  • Small star punch
  • 1/4″ tape
  • 1/2″ tape
Top