Snowfall Beach Tile

Designer: Bailie Benson



  1. On the plate, mix 50/50 Snowfall and SC076.
  2. Mix 50/50 Snowfall and SC046.
  3. Begin with a properly fired 6×6 bisque tile.
  4. Using a soft fan brush, lay down your mixture of SC046 and Snowfall on one half of the tile. (approximately 2 coats of color)
  5. Pounce a sponge on top of the tan to create a sandy texture.
  6. Using the RB144 fan brush, apply the SC076 mixture to the opposite side of the tile.
  7. Build up a few coats randomly of the blue mixture to create a wave texture.
  8. Using the fan brush, apply two layers of regular Snowfall where the blue and tan mixtures meet.
  9. Use the back of the brush to drag lines of the regular snowfall over the top of the blue section to mimic the look of whitecaps on waves.
  10. Allow to dry.
  11. Stilt and fire to cone 06.



  • 6×6 bisque tile


  • SG302 Snowfall
  • SC076 Cara-bean Blue
  • SC046 Rawhide

Decorating Accessories

  • RB144 Soft Fan brush

Miscellaneous Accessories

  • Sponge
  • Paper plate