Spider Mug

Designer: Tim McPherson


  1. Using the Soft Fan, apply 2 to 3 coats of White Gloss to the inside of the mug.
  2. Using the Soft Fan, apply 3 coats of Orange Gloss to the top section of the mug.
  3. Using the Soft Fan, apply 3 coats of Yellow Gloss to the lower section of the mug, excluding the foot area and very bottom.
  4. Using the Script Liner, apply 3 coats of Black Gloss to the handle of the mug.
  5. Using the Clay Carbon Paper, trace on the pattern where desired.
  6. Using the Mini Liner loaded in slightly thinned Black Designer Liner, apply 1 coat to the pattern lines.
  7. Using a damp sponge, remove any color that may have gotten onto the foot area of the mug, as Stoneware gets placed directly on a kiln shelf and is not stilted.
  8. Place on a well kiln washed shelf and fire to shelf cone 6.



  • SB-134 Hippy Mug


  • SW-501 White Gloss
  • SW-502 Yellow Gloss
  • SW-503 Orange Gloss
  • SW-508 Black Gloss
  • SG-401 Designer Liner Black

Decorating Accessories

  • CB-106 # 6 Script Liner
  • CB-110 # 10/0 Mini Liner
  • CB-604 # 4 Soft Fan
  • AC-230 Clay Carbon Paper

Miscellaneous Accessories