Stroke & Coat and Alabaster Soup Bowl

Designer: Carmen Allen



  1. Begin with properly fired cone 04 bisque. Moisten a clean sponge and wipe the bisque to remove any dust.
  2. Switch the cap of SC-103 Lavendear with a plastic detailer cap and apply large dots around the inside rim of the piece (about ½” in diameter). 
  3. Switch the cap of SC-102 Just Peachy with a plastic detailer cap and apply a smaller dot inside the larger Lavendear dot (the sample alternated dots instead of applying it in every dot). Apply an additional row of Just Peachy dots under the single Lavendear dots that remain.
  4. Using a RB-144 #4 Soft Fan, apply 3 coats of SW-106 Alabaster to the inside of the bowl.
  5. Using a CB-106 #6 Script Liner and RB-144 #4 Soft Fan, apply 3 coats of SC-101 Spruce it Up to the handle and outside of the bowl, avoiding the bottom.
  6. Use a clean sponge to wipe the excess glaze off the foot.
  7. Fire to cone 5 / 6 – sample was fired to cone 6.



  • SB-111 Handled Bowl – Stoneware


  • SC-101 Spruce It Up
  • SC-102 Just Peachy
  • SC-103 Lavendear
  • SW-106 Alabaster

Decorating Accessories

  • RB-144 #4 Soft Fan
  • CB-106 #6 Script Liner
  • AC-224 Plastic Detailer Cap

Miscellaneous Accessories

  • Sponge
  • Water Bowl