Waving Flag Plate

Designer: William Pulse



  1. Use a moistened BT-910 Synthetic Sponge to wipe down the ware to remove any dust.
  2. Use CB-604 Soft Fan to apply 2-3 Coats of FN-001 to the entire surface. Let dry.
  3. Transfer the design onto the ware using AC-230 Clay Carbon and a Pencil.
  4. Optional step: If you have the small foam stickers you can apply them to the stars in the pattern to act as a stencil. Make sure the edges are firmly adhered to the surface.
  5. Apply 3 coats of SC-74 Hot Tamale using CB-404 or CB-406 Pointed Round to the second, fourth and sixth stripes.
  6. Using CB-404 and CB-406 Pointed Rounds to apply 3 coats of SC-12 Moody Blue to the background field around the stars. If you didn’t use the sticker, be careful applying the color around the stars.
  7. Optional step: After you have applied the last coat of Moody Blue to the background field and the color hasn’t completely dried but is still damp, carefully remove the star stickers. Let dry.
  8. Using CB-604 to apply 1 thin coat of S-2101 Crystal Clear Brushing to the entire plate.
  9. Stilt and Fire the plate to Shelf Cone 05-06.



  • MB-1163 Rectangle Tray


  • FN-001 White
  • SC-12 Moody Blue
  • SC-74 Hot Tamale
  • S-2101 Crystal Clear Brushing

Decorating Accessories

  • CB-404 Pointed Round
  • CB-406 Pointed Round
  • CB-604 Soft Fan
  • AC-230 Clay Carbon
  • BT-910 Synthetic Sponge

Miscellaneous Accessories

  • Pencil
  • Tile or Pallet
  • Pattern
  • Star Foam Stickers (optional)