Women’s History Month

Designer: Adena Griffith

Share

Instructions

  1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
  2. Apply three coats of FN-004 Red to the back of the plate using the CB-604 #4 Soft Fan brush.
  3. Using the AC-230 Clay Carbon Paper and a pencil trace the pattern onto the face of the plate.
  4. Use the SG-401 Designer Liner Black to go over the traced lines.
  5. Use the CB-110 #10/0 Mini Liner to fill in the blocks of SC-15 Tuxedo on the portrait.
  6. Use the same brush and glaze watered down to create the gray hues of the face. Use the image for reference.
  7. Use SC-43 Lettuce Alone and SC-78 Lime Light to puddle in the glaze using the CB-110 #10/0 Mini Liner to the leaves.
  8. Use SC-6 Sunkissed, SC-43 Lettuce Alone, SC-74 Hot Tamale, and SC-78 Lime Light and the CB-110 #10/0 Mini Liner to glaze the butterflies. Outline the wings with one color then when the glaze is still damp add another to blend the colors as you go.
  9. Once the glazes are completely dry apply two coats of S-2101 Crystal Clear Brushing Glaze to the front of the plate using the CB-604 #4 Soft Fan brush.
  10. Stilt and fire to shelf cone 06/05.

Supplies

Form

  • MB-131 Large Oval Platter

Colors

  • SG-401 Designer Liner Black
  • SC-6 Sunkissed
  • SC-15 Tuxedo
  • SC-43 Lettuce Alone
  • SC-74 Hot Tamale
  • SC-78 Lime Light
  • S-2101 Crystal Clear Brushing

Decorating Accessories

  • AC-230 Clay Carbon Paper
  • BT-910 Synthetic Sponge,
  • CB-110 #10/0 Mini Liner
  • CB-404 #4 Pointed Round
  • CB-604 #4 Soft Fan

Miscellaneous Accessories

Top