Blue Stroke & Coat and Stoneware Bowls

1. Begin with properly fired cone 04 stoneware bisque. Moisten a clean sponge and wipe the bisque to remove any dust.
2. Using a fan brush, apply 2 coats of Stroke and Coat to the inside of the bowl.
3. Using a liner brush, apply 3 coats of SW-401 Light Flux just below the rim.
4. Using a fan brush apply 2 coats of Stoneware glaze (SW-166 or SW167) to the inside of the bowl.
5. Apply 3 coats of SW-508 Black Gloss to the rim and back side of the bowl.
6. Use a damp sponge to ensure the foot is free of glaze.
7. Allow to dry completely.
8. Fire to cone 6.

SB110 Bowl #1: SC11 Blue Yonder, SW401 Flux, SW166 Norse Blue

SB110 Bowl #2: SC9 Jaded, SW401 Flux, SW167 Sand and Sea

SB106: SC10 Teal Next Time, SW401 Flux, SW166 Norse Blue