Elements Rabbit Planter

Designer: Marcia Roullard

Share

Instructions

  1. In wet greenware, cut out the back for a planter, take the clay cut out from the back, and slip attach to the inside of the rabbit to cover the cast hole. Place a drain hole for drainage in the bottom. Fire to cone 04.
  2. Brush on one heavy coat of CG-993 Lavender Sprigs with CB-604 Soft Fan.
  3. In separate cups, pour EL-146 Rain Cloud, and EL-144 Dark Amethyst, add water so that it is the consistency of cream. Make sure to make enough thinned glaze.
  4. Pour the glaze over the rabbit, turn the rabbit so they will mingle, cover the entire rabbit.
  5. Pour SC-15 Tuxedo and SC-29 Blue Grass into the AC-220 Detailer Bottle, snip the tip just enough to see a hole. Squirt these colors over the wet glaze of the rabbit.
  6. When dry, remove the glaze from the eyes, use a clean- up tool to remove from the mouth line and the line around the nose.
  7. Brush the eyes with one coat of SC-16 Cotton Tail, iris is two coats of SC-60 Silver Lining, pupil is SC-15 Tuxedo, and outline. Outline mouth with SC-15 Tuxedo.
  8. Pour the inside with thinned EL-144 Dark Amethyst.
  9. Fire to cone 06

Supplies

Form

  • CD020 Sitting Carved Rabbit

Colors

  • CG-993 Lavender Sprigs
  • EL-146 Rain Cloud
  • EL-144 Dark Amethyst
  • SC-15 Tuxedo
  • SC-60 Silver Lining
  • SC-15 Tuxedo
  • SC-29 Blue Grass
  • SC-16 Cotton Tail
  • SC-60 Silver Lining

Decorating Accessories

  • CB-604 # 4 Soft Fan
  • AC-220 Detailer Bottle
  • CB-110 Liner

Miscellaneous Accessories

  • Dixie Cups
Top