Fuzzy Creature (Beginner)

Designer: Marcia Roullard

Share

Instructions

  1. On bisque fired to 04, brush on two coats of FN-001 White using CB-604 Soft Fan.
  2. While the second coat is wet, squirt on SC-26 Green Thumb and SC-29 Blue Grass from AC-220 Detailer Bottles, in a sporadic fashion. Mix colors separately in the detailer bottle, 1” of color, 1/4” of water and 1/2” of isopropyl alcohol. Mix well. Spray with alcohol for an interesting effect.
  3. When dry, cut the cardboard paper tube in small sections to look like fringe. Sponge SC-88 Tu Tu Tango with SC-97 Cant-elope to the fringe. Press to the tile, repeat several times to get a circle of color.
  4. Cut the tube down one side to reduce the circumference and continue to repeat the stamping process to fill in the circle. The circle should look like a fuzzy ball.

  5. Pencil in the eyes, mouth and legs. Scratch out the eye area and brush two coats of FN-001 White. Brush the pupils, mouth line and legs with SC-15 Tuxedo.
  6. Make small tick marks with the tip of the CB-110 Liner with SC-15 Tuxedo throughout the fuzzy ball shape, always radiating from the center to the edges.
  7. Fire to cone 04/05.

Supplies

Form

  • 6″ Tile

Color

  • SC-15 Tuxedo
  • SC-26 Green Thumb
  • SC-29 Blue Grass
  • SC-88 Tu Tu Tango
  • SC-97 Cant-elope
  • FN-001 White

Decorating Accessories

  • CB-604 #4 Soft Fan
  • CB-110 #10/0 Liner
  • AC-220 Detailer Bottles

Miscellaneous Accessories

  • Pencil
  • Sponge
  • Scissors
  • Cardboard Tube
  • Isopropyl Alcohol
Top