Large Faceted Tree

Designer: Marcia Roullard



  1. Pour mold, drill holes for lights while leather hard, clean and fire to cone 04.
  2. Use an X-ACTO knife to drill a hole for the nipple in the base.
  3. Outline the facets of the tree with SG-405 Green, let dry, brush on 2- 3 coats of CG-750 Noel, clean out the glaze from the holes. Use CB-604 Soft Fan.
  4. Using the fan brush, brush on three coats of FN-004 Red to the base, let dry.
  5. Outline with SG-409 Bright Green.
  6. Brush the base with one coat of S-2101 Clear with the fan brush.
  7. Fire to cone 06. Glue in the bulbs, wire the base.



  • CD-004 14″ Faceted Tree and Base


  • CG-750 Noel
  • FN-004 Red
  • SG-405 Green
  • SG-409 Bright Green
  • S-2101

Decorating Accessories

  • CB-604 #4 Soft Fan

Miscellaneous Accessories

  • Light Socket
  • Cord
  • X-ACTO Knife
  • Nipple (Small Threaded Rod)
  • LED 40-Watt Tube Bulb
  • Plastic Bulbs