Lavender Flower Faceted Bud Vase

Designer: Marcia Roullard

Share

Instructions

  1. Begin with properly fired cone 04 bisque. Moisten a sponge and wipe bisque to remove any dust.
  2. Slightly thin NT-BR Clear with water and pour inside the vase. Turn to coat and pour out the excess glaze. Use a damp sponge to remove the clear glaze from inside the neck of the vase.
  3. While this dries, pour some SC-15 Tuxedo into AC-220 Detailer Bottle and thin slightly with water.
  4. Use the RB-144 Soft Fan to apply two coats of PC-601 Clear Cascade onto the first row of facets and halfway up the neck of the vase. This will help the glaze flow.
  5. Use the Soft Fan to apply two coats of EL-149 Lavender Flower to the vase and inside the neck.
  6. Stir S-2709 Plum Jelly, then pour into the AC-222 Medium Writer Bottle, snip the tip to enlarge the opening so the crystals will flow through to hole.
  7. Squirt S-2709 Plum Jelly on the row of facets on the hip section of the vase.
  8. Use the Soft Fan to apply the third coat of EL-149 Lavender Flower.
  9. Use the detailer bottle with thinned SC-15 Tuxedo to add dots around the top of the vase and at the top of the first row of facets. Spray with rubbing alcohol.
  10. Fire to cone 06.

Supplies

Form

  • MB-1467 Faceted Bud Vase

Colors

  • SC-15 Tuxedo
  • S-2704 Plum Jelly
  • EL-149 Lavender Flower
  • PC-601 Clear Cascade
  • NT-BR Clear Brushing Glaze

Decorating Accessories

  • RB-144 #4 Soft Fan
  • AC-220 Detailer Bottle
  • AC-222 Medium Writer Tip Kit
  • MM-600 Spritzer Caps

Miscellaneous Accessories

  • Sponge
  • Rubbing Alcohol
  • Water
Top