Toboggan Platter

Designer: Marcia Roullard



  1. Begin with properly fired shelf cone 04 Bisque. Moisten a clean sponge and wipe bisque to remove any dust.
  2. Trace the pattern onto the piece. Starting with the middle hat, cut it out from the pattern. Cut the band off the hat as well.
  3. Use the negative space for the top part of the hat body. Place this cut out on the pattern and use the sponge on a stick to apply three coats of SC-11 Blue Yonder. Place the positive section of the top part of the hat (not the band) and tap with one coat of SC-11 Blue Yonder and two coats of SC-16 Cotton Tail.
  4. Repeat this process for the hats on the left and right. The left hat is SC-74 Hot Tamale and SC-98 Slime Time. The right hat is SC-98 Slime Time SC-011 Blue Yonder.
  5. Detail the middle hat with two coatsof SC-74 Hot Tamale stripes. Apply triangles of Hot Tamale on the right hat. Apply two coats.
  6. Punch a 1 ¼” circle and use the negative space to tap in a Blue Yonder ball on the right hat.
  7. Decorate the middle hat’s top with loops of SG-403 Red, SG-404 Blue and SG-405 Green. Decorate the last hat with lines of the Designer Liner colors over the Blue Yonder.
  8. Use the Script Liner to apply SC-98 Slime Time to the tassel on the left hat.
  9. Use SG-404 Blue to shade the Blue Yonder in the hats and SG-405 Green to shade the Slime Time in the hats. Outline the hat band of the middle hat with SG-403 Red.
  10. Use the Script Liner to highlight the hats with SC-16 Cotton Tail.
  11. Use the Soft Fan to apply two coats of SG-704 Peppermint to the front of the piece. You can use a Foundations glaze or Speckta-Clear on the back.
  12. Fire to cone 05/06.



  • Bisque Imports #177 Metro Coupe Platter


  • SC-11 Blue Yonder
  • SC-16 Cotton Tail
  • SC-74 Hot Tamale
  • SC-98 Slime Time
  • SG-403 Red Designer Liner
  • SB-404 Blue Designer Liner
  • SG-405 Green Designer Liner
  • SG-704 Peppermint

Decorating Accessories

  • RB-144 #4 Soft Fan
  • RB-106 #6 Script Liner

Miscellaneous Accessories

  • Palette
  • Scissors
  • 1 1/4″ Circle Paper Punch
  • Paper
  • Sponge-on-a-Stick (3)
  • Pattern