Zen Tangle Plate

Designer: Kaitlyn Miller


  1.  Wipe plate with damp sponge to remove any dust 
  2. Draw out zen tangle design lightly in pencil 
  3. Separate plate into at least 4 sections 
  4. Draw in a different repetitive pattern or mark in each section until your plate is fully covered in designs 
  5. Assign different colors to different sections of your zen tangle  
  6. Using the designer liner in supplied bottle with writer tip, trace lines with designer liner 
  7. Once designer liner lines are dry, use a wet brush to pull color from the lines to add a lighter background color to your design- looking similar to watercolor 
  8. To add more color- squirt a small amount if the designer liner on your palette, with a wet brush pick up some color and apply to design 
  9. Allow design to dry fully 
  10. Apply 2 coats of brushing S-2101 – clear glaze to plate 
  11. Glaze fire plate to Cone 06 using stilts 



  • MB-101 Coupe Salad Plate


  • SG-401 Bright Blue  
  • SG-409 Bright green 
  • SG-401 Black 
  • S2101 Crystal Clear Brushing Clear Glaze 

Decorating Accessories

  • Soft bristled round brush 

Miscellaneous Accessories

  • Sponge
  • Water
  • Pencil