Colorful Cobblestone Coral

Designer: Bailie Benson


  1. Wipe tile with a damp sponge to clean.
  2. Apply two coats of FN-009 with a soft fan brush.
  3. When the base coat has lost its shine, lay the pattern on top and lightly trace with a pen or pencil. The pattern will appear in the soft glaze when the paper is removed.
  4. Touch up any areas that the tracing went through the glaze to the bisque with FN-009.
  5. With a Script Liner, fill in the background area with SC-11.
  6. Fill in the base area with SC-6.
  7. Start with one coral at a time. Apply three coats of SG-202 waiting for the glaze to lose its shine before applying the next coat. Do not let it completely dry!
  8. After the final coat of cobblestone is applied and has lost its shine, add one coat of your desired Stroke & Coat color.
  9. Repeat steps 3 & 4 for each coral.
    1. Remember that Stroke and Coat glazes are intermixable! A dime size of SC-73 and SC-6 will give you orange, SC-11 and SC-6 for green, and SC-11 and SC-73 for purple.
  10. Allow to dry (You will see cracks begin to form where the cobblestone is applied).
  11. Stilt and fire to cone 06.



  • 6” tile


  • SG-202 White Cobblestone
  • FN-009 Black
  • SC-6 Sunkissed
  • SC-73 Candy Apple Red
  • SC-11 Blue Yonder

Decorating Accessories

  • CB-604 Soft Fan
  • CB-106 Script Liner

Miscellaneous Accessories

  • Pattern
  • Sponge
  • Water Bowl
  • Pallet
  • Pen/pencil