Jaded Faceted Tumbler

Designer: Cassidy Chester



  1. Moisten a clean sponge and wipe bisque to remove any dust.  
  2. Paint the faceted area with 2-3 coats SC-16 Cotton Tail, leaving the flat rim area on the outside unpainted. This allows for full coverage on the entire piece. Let dry.  
  3. With a sponge (dry or damp but rung out thoroughly) sponge SC-9 Jaded over the faceted area, taking care to mostly cover the raised areas and leaving the indents white. Let dry.  
  4. With the same sponge, add SC-10 Teal Next Time lightly to the raised areas. Leave some of the SC-9 Jaded and SC-16 Cotton Tail visible. This is an accent. Let dry.  
  5. Use the Soft Fan and Script Liner to apply 3 coats of SC-15 Tuxedo to the inside of the cup, the top rim (coming down to where the faceted area meets the rim), the bottom rim, and the bottom of the cup. Let dry.  
  6. Use the Writer Bottle + Tip with SC-15 Tuxedo to outline the raised facets. Follow the indent to create triangles. Let dry.  
  7. Dip into NT-CLR Clear Dipping Glaze.  
  8. Stilt and fire to cone 06. 



  • MB- 1575 Faceted Tumbler  


  • SC-9 Jaded  
  • SC-10 Teal Next Time 
  • SC-15 Tuxedo 
  • SC-16 Cotton Tail 

Decorating Accessories

  • AC-219 Designer Bottle with Writer Tip  
  • RB-144 #4 Soft Fan  
  • RB-106 #6 Script Liner  

Miscellaneous Accessories

  • Sponge
  • Water