Dotted Frog Climber

Designer: Marcia Roullard



  1. In wet greenware, use the circle template to hold against the back of the frog, use a X-ACTO Knife to cut out the holes.
  2. Clean and fire to cone 04 bisque.
  3. Tape over the holes, thin slightly FN-004 Red pour to the inside of the frog, move around to coat, pour out the excess glaze. Use a damp sponge to clean up excess glaze on the outside of the frog.
  4. Pencil flowers on the elbows, knees, nose, and petals on the toes, pencil a line on the brows over the eyes.
  5. Use the various Designer Liner colors to make dot patterns, start around the cut out circles on the back, dot SG-408 Orange around the outside edges, SG-410 Bright Blue on the inside circles, small SG-401 Black dots around each of the circles.
  6. SG-404 Blue Dots on the body of the frog, add in SG-410 Bright Blue dots, going to SG-409 Bright Green dots on the feet.
  7. Outline all the flower’s petals with small SG-401 Black dots. Refer to photo for colors.
  8. Eyes are a cluster of SG-409 Bright Green and SG-405 Green dots, with dots of SG-401 Black. Outline the eyes with SG-401 Black use CB-110 Liner.
  9. Brush on two coats of S-2101 Clear with CB-604 Soft Fan.
  10. Fire to cone 06/05



  • CD-645 Medium Frog Wall Climber


  • FN-003 Orange
  • FN-004 Red
  • SG-401 Black
  • SG-404 Blue
  • SG-405 Green
  • SG-408 Orange
  • SG-409 Bright Green
  • SG-410 Bright Blue
  • S-2101 Clear

Decorating Accessories

  • CB-604 # 4 Soft Fan
  • CB-110 Liner

Miscellaneous Accessories

  • Circle Template
  • X-ACTO Knife